|
|
 |
| ULTRA-LUBE 220 |
| PROCESSING ADDITIVE FOR POLYMERS |
|
COMPOSITION
High molecular weight, aliphatic fatty acid ester. | |
| Typical Properties |
| PROPERTY |
VALUE |
| Appearance |
White pastilles |
| Specific Gravity(g/cm3) |
0.95 |
| Dropping Point(°C) |
50 - 65 |
| Physiological behavior |
Refer to Material Safety Data Sheet |
| Storage stability |
At least 2 years under normal conditions |
| Packaging |
25 kg Polyethylene bags |
|
|
| RECOMMENDATIONS FOR APPLICATIONS | |
ULTRA-LUBE 220 is a processing additive to improve filler incorporation and release of most rubber compounds. Due to its low volatility, ULTRA-LUBE 220 can be used in heat resistant vulkanisate, e.g. based on H-NBR, FKM and ACM.
ULTRA-LUBE 220 shows good plasticising properties, which leads to reduction of injection pressure in the moulding process and prevents scorch.
ULTRA-LUBE 220 is highly effective in polar compounds, e.g. NBR, to improve flow and release. It can be used at very low dosage levels, from. 0.5 phr on up.
|
|
| DOSAGE 0.5 - 3 phr | |
|
|
|
현위치:
첨가제/배합약품 >
분산제 >
UTLRA-LUBE 220
