|
|
 |
| ULTRA-FLOW 600T |
| PROCESSING ADDITIVE FOR POLYMERS |
|
COMPOSITION
Blend of zinc soaps of high molecular weight fatty acids.. | |
| Typical Properties |
| PROPERTY |
VALUE |
| Appearance |
Yellow pastilles |
| Specific Gravity(g/cm3) |
1.1 |
| Dropping Point(°C) |
75 - 95 |
| Zinc Content(%, max) |
14 |
| Physiological behavior |
Refer to Material Safety Data Sheet |
| Storage stability |
At least 2 years under normal conditions |
| Packaging |
25 kg Polyethylene bags |
|
|
| RECOMMENDATIONS FOR APPLICATIONS | |
ULTRA-FLOW 600T is a very effective material for the physical peptisation of NR. It can be applied in mastication only as well as in the pre-mastication phase of single stage mixing.
ULTRA-FLOW 600T is compatible with most types of elastomers, except for halogenated polymers.
ULTRA-FLOW 600T, if applied at the recommended dosage, does not bloom from the vulcanisates.
It facilitates as a general purpose additive mixing and processing as well as improves the incorporation of compounding ingredients.
|
|
| DOSAGE 1 - 5 phr | |
|
|
|
현위치:
첨가제/배합약품 >
분산제 >
UTLRA-FLOW 600T
